Antivirus Software Services: April 2020

Wednesday, April 29, 2020

How to Modify the Default Font on Microsoft Word?

When you open a new blank document in MS Word, you can see that the app automatically set to ‘Calibri’ or ‘Times New Roman’ languages font. There are multiple options for font, and you can easily change it. According to the versions of MS Word, the steps might differ, but they will be somewhat siiimilar. So, in this article, we will talk about and know how to change the standard font on Microsoft Word.

Modify Standard Font on MS Word 2007

Firstly, you have to launch the MS Word document.
After that, reach the Home section from the toolbar on the upper side of the display.
You should select ‘Font Dialogue Box Launcher’ into the lower right side of the display, beneath the settings of the font.
Later, go to the Font section and select the new settings about size and font.
Now, select the Default option then pick the Yes button to verify the new settings.

Modify Standard Font on MS Word 2010

You should open any MS Word Doc o the system.
After that, reach the Home section.
In case the toolbar should not set the section of Home, choose it.
Navigate to the Font tab and select the small button into the lower right side of the screen.
If the prompt screen, choose the Font section.
You have to choose the fresh default settings- size and font.
Reach the ‘Set as Default’ option into the lower left side of the display and select it.
When the prompt screen, select another option which says, ‘All documents based on the Normal template.’
Now, click on the OK button to verify.

Look at the Permissions

You should reach the taskbar then select the Start button.
After that, input ‘Normal.dotm’ into it and select the OK button.
Then select the ‘Normal.dotm’ within the search outcomes then right-click on it.
You have to choose the Properties option.
Reach the General section the untick the option of ‘Read-only.’
Launch the Security section and select the name beneath the user names or groups.
You should mark the box of Permissions to view whether you should get the Write permission.
Now, select the OK button to complete.

Turn off Add-Ins

Launch an MS Word doc and select the File option.
Thereafter, select the Options and then choose the ‘Add-Ins’ option.
Reach the box of ‘Add-Ins’ and select the one you would like to turn off.
You should go down to the Manage option then select that add-in type within the list.
Then select the Go option.
Don’t forget to uncheck the preferred add-ins boxes.
Now, select the OK button and redo the instructions for each needed add-ins.

Emily Johnson is a creative person who has been writing blogs and articles about cybersecurity. She writes about the latest updates regarding office.com/setup and how it can improve the work experience of users. Her articles have been published in many popular e-magazines, blogs, and websites.

Source: https://emilyjohnso731.wordpress.com/2020/04/30/how-to-modify-the-default-font-on-microsoft-word/

How to Open Dropbox Folders on Finder or File Explorer?

Dropbox is a service of cloud storage, which means you can drop the files there and use them later. Once you choose your personal plan, Dropbox will copy each file on your PC automatically, and you can just select what you would like to save. Dropbox will provide you a folder that permits you to share the files between computers. Most users ask how its Dropbox folders open on the Finder or File Explorer? So, here are the instructions are given below.

Get Back Older Dropbox Folder

First of all, you have to launch the Dropbox on your device.
After that, select the Dropbox button into the system tray of the Windows taskbar or menu section of Mac.
You will see a Dropbox screen on your window.
Then select the avatar of account. It resembles a circle with the initials.
Go to the menu and click on the ‘Preferences’ option.
Thereafter, reach the ‘Preferences’ screen that launches, go for the option of “Open folders in” on the lower side of the General pane.
You should click on the box and change into Finders for Mac or File Explorer for Windows 10.
In case this is a change to the “Dropbox desktop app,” later than launches the Dropbox folder in desktop file manager of Dropbox rather than a default folder.
Once you make a chosen, select the OK button to apply the changes and shut the screen or easily exit the Preferences screen on Mac.
Now, wherever you launch the folder of Dropbox in File Explorer (or Finder or select the button of Dropbox in the menu bar or taskbar), then check the Dropbox files as to whether they are in an ordinary folder.
Once the first Dropbox opened, this was some rare services that create sharing data between systems and another device as moving and putting into the folder.
Finally, there are many Dropbox alternatives for Mac and Windows that function too.

Understand If Files are Private

Navigate to the site of Dropbox and select the option of ‘Sign-in.’
After that, input the password and email ID connected with the account and choose the ‘Sign-in’ option.
Go to the main list appearing in every folder and file.
Now, check the ‘Kind’ section to understand whether any of the files or folders are shown as shared.

Delete Permissions on Shared Folders or Files

You should visit the official site of Dropbox and select the URL of Sign In then input the password and email ID connected with the account.
Then select the Sign-In option.
Select the URL of ‘Options’ of the shared folder or file that you would like to make personal.
Now, choose the Gear button beside the person you would like to delete to reach the menu of Settings and later pick the ‘Kick Out’ option.

Delete a Sharing URL from a Folder or File

Go to the site of Dropbox and select the option of ‘Sign-in.’
After that, input the password and email ID connected with the account and choose the ‘Sign-in’ option.
You should select the ‘Links’ in the panel of the menu.
Now, select the ‘X’ button beside the folder or file from that you would like to delete the link.

Source: https://emilyjohnso731.wordpress.com/2020/04/30/how-to-open-dropbox-folders-on-finder-or-file-explorer/

How to Fix Event 1000 Application Error -on-Windows-10?

The Event Viewer log is one of the best tools for Windows 10, which offers in-depth detail about background procedures, containing errors causing programs to crash. However, due to the error code ‘Event 1000’, you cannot run the needed software or program. So, if you are facing this issue on your laptop or desktop, you must read this article. Here are the instructions to solve the error.

Run SFC Scan

Hold the Windows and X button altogether over the keyboard.
After that, click on the ‘Command Prompt (Admin) to invoke the raised Command Prompt.
Then you should insert the command ‘DISM.exe /Online /Cleanup-image /Restorehealth’ into it and hit the Enter button,
Thereafter, input ‘sfc /scannow’ into it and select the Return button.
Now, the scanning process will take 30 minutes.
Once you have done, reboot the system.

Scan Registry

Go to your preferred web browser and download the ‘CCleaner’ tool for Windows.
After that, launch the CCleaner tool and select the Registry on the screen of Software.
You should click on the all the checkboxes of the registry and hit the button of ‘Scan for Issues.’
Then go to the option of ‘Fix selected Issues.’
Now, select the ‘Fix All Selected Issues’ option to repair the registry.

Clean Boot Windows

Hold the Windows and R button altogether over the keyboard to invoke the Run section.
Then insert ‘msconfig’ into it and select the OK button to launch the screen of System Configuration.
You should click on the option of ‘Selective startup’ over the General section.
Choose both options of ‘Use original boot configuration’ and ‘Load system services.’
Then untick the box of ‘Load system items.
You should click on the Services section.
Thereafter, select the option of ‘Hide all Microsoft services.
You have to click on the Disable all option.
Later, select the Apply button and then OK.
Now, click on Restart option to restart Windows.

Install MS NET Framework

Hold the Windows and R button altogether over the keyboard to invoke the Run section.
Thereafter, insert ‘appwiz.cpl’ into it and select the OK option.
Finally, you have to select the ‘Turn Windows features on or off’ option to invoke the screen.

Install the Software Again

Hold the Windows and R button altogether over the keyboard to invoke the Run section.
After that, insert ‘appwiz.cpl’ into it and select the OK option.
You should click on the problematic program.
Then go to the Uninstall option and click on it.
Click on the Yes option to verify.
Thereafter, reboot the system.
Now, install the newest software version again.

Source: https://emilyjohnso731.wordpress.com/2020/04/29/how-to-fix-event-1000-application-error-on-windows-10/

HOW TO FIX COMMON ISSUES ON GOOGLE -HANGOUTS?

Google Hangouts is one of the great apps for video meetings and chats with your colleagues and friends. But there are several issues in it like sound issues, webcam not working, and video problem, etc. So, if you wish to know these fixes, then here are the directions given below.

Fix Notification Sound Issue

Firstly, launch the application and select the hamburger icon on the upper section of the display.
After that, select the Settings option and later choose the main account name.
Beneath the Notification tab, choose the Messages option, and launch Sound Settings.
Now, the notification sound is already set into “Default notification sound.”
Then invoke the section and modify the alert tone.
If you would like to solve this issue by incoming calls, then redo the same instructions once gone into the Notification field then choosing Incoming calls instead of Messages.

Fix Webcam

While video calling, mostly users notice that their camera is not working correctly. Normally, the application gets stuck on the “camera is starting” text. You can try clearing the cache and temporary files or even reattaching the webcam. If in the end even a restart does not fix the issue, then you should wait for the next software update.

Fix Green Screen Problem

The users who are keen to fix the green screen problem can determine to pursue the directions given below.

You should launch the Chrome and select the vertical ellipsis menu icon on the upper right section of the display.
Thereafter, launch the Settings screen.
Afterward, move down then browse for ‘Use hardware acceleration where available’ and turn off this feature.
Optionally, on the Chromebook, input ‘chrome://flags’ inside it.
Now, move down and browse for ‘Hardware-accelerated video encode’ to tur it off.

Remove Hangouts Data and Cache on Mobile

Navigate to the Settings and then choose App and notifications option.
After that, select the All apps option.
Then move down or browse for Hangouts.
You should select the ‘Search and cache and choose Clear cache or Clear storage.

Remove Hangouts Data and Cache on Chrome

Firstly, launch Chrome and select the vertical ellipsis menu icon.
Then click on the ‘More tools’ option and then select the ‘Clear browsing data’ option.
Go to the ‘All-time’ option and select it.
You should mark the boxes of ‘Cached images and files’ and ‘Cookies and other site data.’
Now, click on the Clear data option.

Source: https://emilyjohnso731.wordpress.com/2020/04/29/how-to-fix-common-issues-on-google-hangouts/

HOW TO FIX COMMON ISSUES ON GOOGLE HANGOUTS?

Add caption

Fix Notification Sound Issue

Firstly, launch the application and select the hamburger icon on the upper section of the display.
After that, select the Settings option and later choose the main account name.
Beneath the Notification tab, choose the Messages option, and launch Sound Settings.
Now, the notification sound is already set into “Default notification sound.”
Then invoke the section and modify the alert tone.
If you would like to solve this issue by incoming calls, then redo the same instructions once gone into the Notification field then choosing Incoming calls instead of Messages.

Fix Webcam

Fix Green Screen Problem

The users who are keen to fix the green screen problem can determine to pursue the directions given below.

You should launch the Chrome and select the vertical ellipsis menu icon on the upper right section of the display.
Thereafter, launch the Settings screen.
Afterward, move down then browse for ‘Use hardware acceleration where available’ and turn off this feature.
Optionally, on the Chromebook, input ‘chrome://flags’ inside it.
Now, move down and browse for ‘Hardware-accelerated video encode’ to tur it off.

Remove Hangouts Data and Cache on Mobile

Navigate to the Settings and then choose App and notifications option.
After that, select the All apps option.
Then move down or browse for Hangouts.
You should select the ‘Search and cache and choose Clear cache or Clear storage.

Remove Hangouts Data and Cache on Chrome

Firstly, launch Chrome and select the vertical ellipsis menu icon.
Then click on the ‘More tools’ option and then select the ‘Clear browsing data’ option.
Go to the ‘All-time’ option and select it.
You should mark the boxes of ‘Cached images and files’ and ‘Cookies and other site data.’
Now, click on the Clear data option.

Source: https://emilyjohnso731.wordpress.com/2020/04/29/how-to-fix-common-issues-on-google-hangouts/

Tuesday, April 28, 2020

How to Fix Chrome Freezing Issue on Windows 10?

Chrome is one of the most used browsers on the internet, but most of the users reported that when they upgrade to Windows 10, they are facing freezing issues on their Google Chrome browser continuously. So, if you are facing this issue, then follow these guidelines given below carefully.

Upgrade the Graphic Card Driver

You should upgrade the driver manually by visiting the site of the hardware manufacturer and browse the newest driver for the graphic card. Make sure that to select a compatible driver with the same hardware model number and the Windows version.

Run SFC

If the users are attempting to run SFC, then they should correctly employ the given instructions.

Navigate to the Windows Search on your system.
After that, insert ‘cmd’ into it and select the OK button to launch the Command Prompt.
Reach the outcomes, select the Command Prompt, and right-click on it.
You should click on the Run as an administrator.
On the Command Prompt, input ‘sfc /scannow’ into it and hit the Enter button.
It will start the system scan process and take a few times.
Once it complete, reboot the system.
Now, open the Chrome browser and check whether the freezing problem is fixed or not.

Remove Browsing Data

If you would like to remove the browsing data, then you can determine to pursue the directions given below.

Launch the Chrome browser on your system.
After that, click on the vertical ellipsis menu icon at the upper right-hand side of the screen.
Then go to the More tools option and select it.
You should select the ‘Clear browsing data’ option.
In the Basic section, adjust the ‘Time range to All-time’ and click on all tick boxes give below.
Go to the Advanced section and adjust the Time range to All time.
Then click on the ‘Cookies and other site data,’ ‘Browsing history,’ ‘Cache images and files.’
You have to choose the Clear data option.
Once removed, the data, input ‘chrome://restart’ into the URL section and hit the Enter button to reboot the Chrome and look whether the issue is fixed or not.

Turn off the Extensions

If the users are attempting to turn off the extensions, then they should correctly employ the given instructions.

Launch Chrome and reach the address bar.
After that, input ‘chrome://extensions’ into it and hit the Enter button.
You should switch the toggle of all extensions to turn them off.
Then reboot the Chrome browser and check whether it works correctly.

Reset Settings of Chrome

If you would like to reset the settings of Chrome, then you can determine to pursue the directions given below.

Open the Chrome browser on your system.
After that, select the vertical ellipsis menu icon at the upper right-hand side of the screen.
You should click on the Settings option.
Go to the lower side of the screen and select the Advanced option.
Beneath the ‘Reset and cleanup’ option, select the ‘Reset settings to their original defaults’ option.
Click on the Reset Settings option.
Now, reopen Chrome and look whether the issue still continues or not.

Detach or Attach the Internet

If the users are attempting to detach or attach the internet, then they should correctly employ the given instructions.

Navigate to the Network button on the section of the taskbar.
After that, click on the ‘Airplane mode’ to enable it.
Then choose the ‘Airplane mode’ once more to disable it.
Now, reboot the Chrome to test the problem.

Source:

https://emilyjohnso731.wordpress.com/2020/04/29/how-to-fix-chrome-freezing-issue-on-windows-10/

Friday, April 24, 2020

Fixed: Dell PC Error Code 0146?

If you are a Dell user and facing freezing issues alongside software crashes, then the reason behind all this might be ‘Dell Error Code 0146.’ If the user is facing the same too, then they should go through the blog to fix it:

Launch Full System Scan

Navigate to the Windows logo on your system.
After that, input ‘defender’ into it and hit the Enter key to launch the Windows Defender.
You should reach the left-hand side panel and click on the shield button.
Go to the new screen and choose the option of an Advanced scan.
Now, click on the circle of Full Scan to start the full PC malware scan.

Launch Disk CheckUp

If the users are trying to launch the disk checkup, then they should carefully apply the given steps.

Reach the Window menu on your system.
Thereafter, input Disk Cleanup into it and hit the Enter key.
Then, you have to wait until Disk cleanup finished the scan process.
Once finish the scan, tick the box of ‘Temporary files’ and select the OK button to remove.
Now, click on the delete files to continue.

Fix System Registry

In case you intend to fix the system registry, then you can opt to follow the below-mentioned guidelines.

Navigate to the Windows logo on your system.
Thereafter, input ‘cmd’ into it and hit the Enter key to launch the Command Prompt.
You should click on the ‘Run as Administrator.’
Then input ‘sfc /scannow’ into it and hit the Enter button.
Now, you have to wait for the procedure of scanning to finish and reboot the system.
After this, every damaged file will be swapped on restart.

Perform PSA Diagnostics

If the users are trying to perform PSA diagnostics, then they should carefully apply the given steps.

First of all, reboot the Dell system.
After that, hold the ‘F12’ button frequently until you see Dell’s logo.
Then you have to wait till you see the ‘One Time Boot’ menu.
You should hit the ‘Down Arrow’ to mark the option of PSA Diagnostics.
Press the Enter key.
Now, PSA will begin itself. Pursue the pop-ups to fix the error problem.

Restore BIOS Settings

In case you intend to restore the BIOS settings, then you can opt to follow the below-mentioned guidelines.

Get started by rebooting the Dell system.
After that, click on the F2 button constantly until you see the System Setup page.
Then reach Right Arrow icon and wait till you see the Exit option.
Go to the ‘Down Arrow’ icon and click on the option of ‘Load Optimized Defaults.’
Finally, click on the Enter key.

Perform PC Restore under Safe Mode

First of all, you have to turn off your system and switch on it once again.

After that, go to the option of ‘Run in Safe Mode’ then press the Enter key.
You should reach the Start button, and input ‘system restore’ then press the Enter button.
Then pursue the pops-up to get back to a firm restore point.
Now, you have to wait until the procedure finishes and then reboot the system.

Perform PC under Safe Mode to Clean Boot

First of all, switch off the system.
After that, turn on the system once more and click on the F8 button until you see the Windows logo.
You should click on the ‘Safe mode with networking’ then press the Enter button.
Reach the Windows logo and hold the Win + R keys at the same time to launch the Run section.
Then input ‘msconfig’ into it and hit the Enter key to launch the system configuration tool.
Go to the screen of system configuration and select the General section pursued by the Selective startup.
You have to untick the box of ‘load startup items’ then select the Services option.
Now, check the box of ‘hide all Microsoft services’ and turn off all.

Source: https://otwebroot.com/fixed-dell-pc-error-code-0146/

Thursday, April 23, 2020

HOW TO FIX CAN’T LOG IN TO WINDOWS 10?

There are several irritating issues on Windows 10, but the worst one is definitely when you can’t log in your Windows. Today we are solving the issue because due the error you cannot access the apps or files. There are some virus or malware issues that stops you from logging in your device. So, don’t worry about that as here are some instructions to solve this issue.

Check the Keyboard

Go to the login window at the lower right-hand side and select the Ease of Access button.
After that, locate the on-screen keyboard then select it.
You will see a keyboard on your screen.
Now, with the help of your mouse to input the password and attempt to log in once more.

Perform System into Safe Mode

While pressing the Shift key, reboot the system.
Thereafter, you will see the ‘Advanced Startup’ menu on the boot.
Then click on the Troubleshoot option.
Navigate to the Advanced Options and then click on the Startup Settings.
You have to choose the Restart option.
You will see a screen with different startup options.
Now, hold the F5 or 5 key over the keyboard to select the ‘Enable Safe Mode with Networking.’.
Finally, wait to finish the boot process.

Use Local Account

Navigate to the Settings application on your system.
After that, reach the Accounts tab and select the ‘Your info’ section.
Go to the ‘Sign in with a local account instead’ and select it.
You should input the password and select the Next button.
Once you have done, select the ‘Sign out and finish’ option.
Finally, sign-in to the Windows 10 system with the local account.

Run System Restore

During pressing the Shift key, reboot the system.
After that, you will see a menu of Advanced Startup on the boot.
Navigate to the Troubleshoot option.
You should click on the System Restore.
Then click on the past restore point and pursue further steps.
Now, complete the setup.

Perform the System File Checker Scan

Reach the Windows Search on your system.
After that, input ‘cmd’ into it and select the OK button to invoke the Command Prompt.
Then select the ‘Run as Administrator’.
Input the pursuing command and hit the Enter button over the keyboard: sfc/scannow.
You have to wait to complete the process.
Now, reboot the system.

Reset the Windows

Firstly, navigate to the Settings application on your system.
After that, click on the Update and Security option.
Then go to the Recovery option and click on it.
Beneath the ‘Reset this PC’ option. Click on the “Get Started’ button.
You should select if you would like to

correctly wipe the partition or keep the personal files.
Now, pursue the on-screen steps carefully.

Source: https://emilyjohnso731.wordpress.com/2020/04/24/how-to-fix-cant-log-in-to-windows-10/

HOW TO FIX 0X80070015 ERROR?

When the users attempt to store the data on their drive or back up their folders and files, they may face the ‘ERROR_NOT_READY’ error or 0x80070015 error code. If you are facing a similar issue, then here are the instructions to repair the error.

Launch Hardware and Devices Troubleshooter

In case you intend to launch hardware and devices troubleshooter, then you can opt to follow the below-mentioned guidelines.

Navigate to the Windows logo on your system.
After that, input ‘settings’ into it and hit the Enter key.
You should click on the ‘Update and Security’ tab.
Then click on the Troubleshoot option in the left panel.
Go to the Hardware and Devices then select Run the troubleshooter.

Use In-Built Hardware Troubleshooter on the Previous Version of Windows

If the users are trying to use an in-built hardware troubleshooter on the previous version of Windows, then they should carefully apply the given steps.

Navigate to the Windows logo on your system.
Thereafter, input ‘control panel’ into it and hit the Enter key to open the Control Panel.
Select the Hardware and Sound option. Then click on the ‘devices and printers’ option.
Reach the doubtful drive, and right-click on it. Then choose the Troubleshoot option.
Now, you have to wait for the fixing process to finish and redo the system to look at whether the drive is now applicable.

Uninstall and Install the USB Controller Driver Again

In case you intend to uninstall and install the USB controller driver again, then you can opt to follow the below-mentioned guidelines.

Hold the Win + X keys at the same time on your system.
After that, click on the Device Manager.
You should find and extend the option of ‘Universal Serial Bus controllers’ in the screen of Device Manager.
Reach the section of ‘Universal Serial Bus controllers’ and right-click on it then select the Uninstall option.
You should uninstall the drivers one by one.
Now, reboot the system and look at the action that fixed the issue.

Allot Driver Letter to the External Drive

If the users are trying to allot driver letter to the external drive, then they should carefully apply the given steps.

Hold the Win + R keys at the same time on your system to launch the Run section.
After that, input ‘diskmgmt.msc’ into it and hit the Enter key to show the console of disk management.
Go to the external drive and right-click on it to launch the menu of the drive.
You should select the option of “Change Drive Letters and Paths” and choose the ‘Change’ option.
Select the radio option of “Assign the Following Drive Letter.”
Reach the drop-down section to see applicable drive letters.
Navigate to the preferred drive letter to allot to the external drive. There select the OK button.

Install the Newest Drivers in Compatibility Mode

In case you intend to install the newest drivers in compatibility mode, then you can opt to follow the below-mentioned guidelines.

Go to the site of the manufacturer and download the driver.
After that, reach the setup file of the driver and right-click on it.
You should click on the Properties option.
Navigate to the Compatibility section and tick the “Run this program in compatibility mode for” box.
Then click on the Operating System version with the drop-down section.
Now, after finishing the installation, reboot the system and redo the command.

Launch Full System Scan

If the users are trying to launch a full system scan, then they should carefully apply the given steps.

Navigate to the Windows logo on your system.
After that, input ‘defender’ into it and hit the Enter key.
Then twice click on the Windows Defender to open the utility.
Go to the left side panel and click on the shield button.
Reach the new screen and select the Advance scan button.
Now, tick the option of Full Scan to open the full system malware scan.

Fix the Registry

In case you intend to fix the registry, then you can opt to follow the below-mentioned guidelines.

Navigate to the Start menu on your system.
After that, input ‘cmd’ into it and hit the Enter key to launch the Command Prompt.
You should click on the ‘Run as Administrator.’
Then input ‘sfc /scannow’ into it and press the Enter button.
Finally, you have to wait to finish the procedure of scanning and reboot the system.

Clean Boot the System

If the users are trying to clean boot the system, then they should carefully apply the given steps.

Go to the Windows Search on your system.
After that, input ‘system configuration’ into it and hit the Enter key.
Reach the Services section and tick the ‘Hide all Microsoft services’ box.
Then select the ‘Disable all’ option.
You should reach the Startup section and then choose the ‘Open Task Manager’ option.
Navigate to the Startup section in the Task Manager and click on every item then choose the Disable option.
Then shut the Task Manager.
Go to the System Configuration section and reach the Startup section then select the OK button.
Now, reboot the system.

Clean Boot the Windows 7

In case you intend to clean boot Windows 7, then you can opt to follow the below-mentioned guidelines.

Navigate to the Start menu on your system.
After that, input ‘msconfig’ into it and hit the Enter key.
You should reach the General section and select the Selective Startup option.
Then, remove the items of the Load Startup tick box.
On the Services section, click on the box of ‘Hide All Microsoft Services’ and select the ‘Disable all’ option then click on the OK button.
Now, reboot the system.

Source: https://emilyjohnso731.wordpress.com/2020/04/23/how-to-fix-0x80070015-error/

Wednesday, April 22, 2020

How to Fix 0x80070043 Error on Windows?

Many Windows users have complained that they are facing freezing systems, security issues, and a slow system due to the damaged Windows system files. The issues are generally accompanied by an error code. If you are also facing the error code, then the blog will help you fix it:

Turn on Network Startup Local Policy

If the users are trying to turn on network startup local policy, then they should carefully apply the given steps.

First of all, press the Win + R keys at the same time on your system to launch the Run section.
After that, input ‘gpedit.msc’ into it and hit the Enter key to launch the ‘Group Policy Object Editor.’
When you see prompt by User Account Control screen, select the Yes button to allow administrative privileges.
Go to the ‘Local Computer Policy’ and extend it then click on the Computer Configuration.
You have to reach the right-hand side of the screen and select the Administrative Templates.
Navigate to the System and select it.
You should select the Logon with the applicable options list.
During going to the folder of Logon, you require to reach the ‘Always wait for the network at computer startup and logon’ option and right-click on it.
Go to the Properties option and click on it.
You have to select the Settings section and then choose the Enabled option.
Then confirm it.
Now, reboot the system and wait to finish the next startup.

Run an SFC Scan

Hold the Win + R keys at the same time on your system to launch the Run section.
After that, input ‘cmd’ into it and hit the Enter key.
Then hold ‘Control + Shift + Esc’ keys at the same time on your system to launch a raised Command Prompt.
You should click on the option of ‘Run as an administrator.’
Once you go to the Command Prompt, pursue the pursuing command and hit the Enter key: ‘sfc /scannow.’
Now, once you finish the process, shut the raised Command Prompt, and then reboot the system.
Finally, look at whether the problem is fixed at the next PC startup.

Through DISM Command Utility

If the users are trying to fix the error through the DISM command utility, then they should carefully apply the given steps.

Go to the Windows logo on your system.
After that, input ‘cmd’ into it and hit the Enter key.
Then select the Command Prompt and right-click on it.
You will see the UAC prompt on your screen.
You require to select the Yes button to allow the admin privileges to the CMD screen.
Go to the next sequence of the startup, launch the Command Prompt to pursue the first instruction.
Thereafter, input the pursing command to start the DISM scan: ‘DISM /Online /Cleanup-Image /RestoreHealth.’
During the command is performing, you might view the procedure stuck at 20 % or more.
After some time, the procedure will finish effectively.
Now, reboot the system.

Source: https://emilyjohnso731.wordpress.com/2020/04/23/how-to-fix-0x80070043-error-on-windows/

How to Fix 0x00028002 Network Error?

Internet has always played an integral role in our society, and given the current situations, it is on the things that is holding the economy together. But what happens when a network error code restricts your system from working properly. If you are facing an error code 0x00028002, then the blog will help you fix it.

Remove the Profile of Wireless Network

In case you intend to remove the profile of the wireless network, then you can opt to follow the below-mentioned guidelines.

Go to the Settings on your system.
After that, click on the ‘Network and Internet’ option.
You should select the URL of ‘Manage known networks’ through the right panel.
Beneath the ‘Manage known networks,’ when you view all the Wi-Fi network list that you have linked to.
Then select the network you would like to remove.
You have to select the Forget option, and then the profile of the wireless network will be removed next.
Locate the wireless connection that you would like to disconnect through the sort, filtering, and search options.
Now, select it and click on the Forget option.

Upgrade Wireless Adapter Driver

If the users are trying to upgrade the wireless adapter driver, then they should carefully apply the given steps.

Hold the Win + R keys at the same time on your system to launch the Run section.
After that, input ‘devmgmt.msc’ into it and hit the Enter key to launch the Device Manager.
After prompting the UAC screen, select the Yes button to proceed with administrative privileges.
You require to move down via the installed apps list and extend the Network Adapters menu.
Reach the ‘wireless adapter driver,’ and right-click on it, then click on the Update driver.
You have to select the ‘Search automatically for updated driver software’ option.
When you found the fresh driver version, pursue the steps to finish the process.
Now, reboot the system.

Execute a System Restore

In case you intend to execute a system restore, then you can opt to follow the below-mentioned guidelines.

Go to the system and sign in as an administrator.
After that, select the Start menu and click on the All Programs option.
Then click on the Accessories option then select the System Tools.
You should reach the Next button and select it.
Go to the current PC restore point within the ‘On the list’ and select the ‘restore point list.’
Later, reach the verification screen and select the Next button.
Now, apply the changes by rebooting the system.

Source: https://ukmsoffice.com/blog/how-to-fix-0x00028002-network-error/

HOW TO DOWNLOAD AND PLAY FORTNITE ON NINTENDO SWITCH?

Fortnite is one of the most popular games and it’s free to play on Nintendo Switch. If users want to download this game, then they can simply download and install over the eShop application. So, if you want to know how, then here are the instructions to download and install it on both Nintendo Switch and Nintendo Switch Lite:

Fortnite Download on Nintendo Switch

Firstly, you have to switch on the Nintendo Switch the sign in to the account of Nintendo.
After that, you should launch the Nintendo eShop and select the orange color button or choose and hold the A.
Then reach the Search section from the left-hand side menu and input ‘Fortnite.’
Select the Search option or hit the ‘+add’ button on the controller of Nintendo Switch.
Thereafter, choose the Fortnite when it shows.
You have to select the ‘Free Download’ or mark the icon. They hit the A button.
You will see a verification page. Choose the Free Download option.
After that, go to the Close button to shut the Nintendo Switch eShop or choose ‘Continue Shopping’ to let it open and see another listing of the video game.
You will see a Fortnite button on the home page of Nintendo Switch quickly. It flickers lightly and process of download with its lower during its downloading then installing.
Now, after disappearing the process bar, it means the game will be downloaded.

Make and Connect an Epic Account of Games

Navigate to the PC, launch the desired web browser.
After that, visit ‘EpicGames.com.’
You should choose a Sign-in option.
Go to the Sign-Up option.
Then input the needed sections and choose ‘Create Account.’
You have to verify the email address by the link that sent on your account.
Pick the link and activate the account of Epic Games.
After choosing the URL into the email, the site of Epic Games launches in a new web browser section and sign-in automatically.
Navigate to the left-hand side menu and choose the Connected Accounts.
You should choose the Connect option beneath every video game network you would like to play Fortnite on with a similar account.
Thereafter, configure the account of Epic Games and linked to the account of Nintendo, you should launch Fortnite on the Nintendo Switch.
Select the Fortnite button on the home page of Nintendo Switch to launch the game.
When the game loads, you have displayed a welcome page then hit the A button to proceed.
Hit the ‘Y’ button to admit the user agreement.
You will see the latest detail of game updates.
Once complete the loading, it imports the data of Epic Games in the Fortnite’s version of Nintendo Switch.

Add Friends of Nintendo Switch to Fortnite

Launch the Fortnite game, hit the (-) button on the left-hand side of the controller.
After that, hit the Y button.
Show the button beside to ‘Enter Epic Name or Email’ then hit the A button on the controller.
You should input the Epic username of friends or their connected email ID.
Then hit the OK button.
Once your friend accepts the friend request, it will show on your friend list of Fortnite.

Source: https://emilyjohnso731.wordpress.com/2020/04/22/how-to-download-and-play-fortnite-on-nintendo-switch/